Surface 4 Sided – Slat Cladding

1   Finish Options

2   Design Options

3   Size Options

1

Finish Options

Finish Based On Project Specs

Face LED Lighting

Lip LED Lighting

Toe-Kick LED Lighting

Lattice

Aluminum Lattice

Adjustable Feet

Casters

Surface Mounts

Drainage Fittings

Irrigation Sleeves

Drip Tray

Custom

Design Options
Face LED Lighting

LED Face lighting available on any flat surface container, LED Toe Kick lighting available on most containers, 12 volt DC operation or hard wired into an already existing 12 volt system, Transformer sold with first 12″ on LED Toe Kick and sold separately with LED Face Lighting.

Lip LED Lighting

Lip LED Lighting is available on most containers. 12 volt DC operation or hard wired into an already existing 12 volt system. Transformer sold with first 12" on LED Lip Lighting if requested.

Toe-Kick LED Lighting

Toe-Kick LED Lighting is available on most containers. 12 volt DC operation or hard wired into an already existing 12 volt system. Transformer sold with first 12" on LED to-kick lighting if requested.

Lattice

Pre-assembled Ipe wood Lattice using an overlapping dado joint with a brass pin detail at intersection. Mechanically fastens to internal brackets located within the container.

Aluminum Lattice

Pre-assembled aluminum lattice which mechanically fastens to internal brackets located within the container. Can be powder coated to match the container or powder coated a different color for contrast.

Adjustable Feet

Commercial grade stainless steel adjustable feet fastened onto container in order to level container on uneven surfaces. Rated at 2,000 lbs. per foot.

Casters

Casters are mechanically fastened to a recessed bottom creating a 1/2″ -3/4″ reveal between the deck and the bottom edge of the container.

Surface Mounts

Hardware to blindly secure planters to the deck surface.

Drainage Fittings

1″ pipe nipple or elbow is welded into the container in order to direct water away from deck surface, eliminating tea staining and standing water.

Irrigation Sleeves

1″ sleeve is welded into the interior of the container in order to hide the irrigation line and simplify installation and maintenance of the irrigation system.

Drip Tray

Drip tray is sized to match the containers footprint. 1/2″ Gap between the tray and the container creates a nice shadow reveal. Made of aluminum and powder coated to match. Must be requested with initial order.

Custom

All products can be custom built to suit specific needs. Contact our estimating department for options.

Size Options

6080: L 27” W 27” H 28” | 225 lbs Fibre C | 185 lbs Trespa, Prodema & FSC Certified Woods | 105 lbs Aluminum
6100: L 60” W 20” H 27.5” | 325 lbs Fibre C | 260 lbs Trespa, Prodema & FSC Certified Woods | 140 lbs Aluminum

All products can be custom built to suit specific needs. Please contact our estimating department to discuss your customization needs.